Detail types of the blinds SIN line

• type: 10
  

  - Only tilting
  - Min. radius 10 cm
  
  Important measurments

  
  
  
• type: 11
  

  - Raising of the slats only in standard part
  - Min. radius 10 cm
  
  Important measurments

  
  
  
  
• types: 12A - 12B
  

  - Only tilting
  - Min. radius 10 cm
  
  Important measurments

  
  
  
  
• types: 13A - 13B
  

  - Raising of the slats only in standard part
  - Min. radius 10 cm
  
  Important measurments

  
  
  
  
• type: 14
  

  - Raising of the slats only in standard part
  - Min. radius 10 cm
  
  Important measurments

  
  
  
  
• remarks for the measuring
  

  By types 12 and 13 you could measure like this:

  •  Choose a straight given gauge (e.g. a piece of straight aluminium or wooden profile).
  •  Mark on it precise midpoint.
  •  Place this gauge to the arch of the window you wish to measure in any place of the arch - the more get the length of the gauge near the maximum distances of the arch, the more precisely is the measurement.
  •  In the half of the gauge under the angle of 90° measure e.g. with a tape metre the distance between the gauge and the rise of arch.
  •  In the order form give the total length of gauge as "a" and the measured distance to the rise of arch as " Va".

  Practical illustration

  Remark: that way you can measure the types 10, 11 and 14 too.
  Don´t forget the limits by some types.